There are myriad issues that may occur with almost any painted miniatures. It might happen on freshly newly colored surface or it may occur with time. The greatest technique to avert these untoward painting issues is to understand preventative steps that occur before employing a new color. Below are normal coloring issues and the corresponding suggestions about how to treat them.
A problem that normally occurs is what we call the blocking. It’s when two colored surfaces are secured together which isn’t the result you need like sticking of this doorway into the jam. This happens because the color didn’t wholly dry before shutting the door. Another reason is using latex colored with poor quality. Along with providing more hours for drying out, a better option is to use a shade of high quality or search for semi-gloss acrylic latex shade. More frequently than not, the caliber of latex color is proportional to its price. The higher the grade, the more money you need to shell out. Earning money on quality color is a whole lot better than paying for low quality paints in addition to the chance of back job expenses.
Have you ever noticed a miniature that seems to be too glossy in some regions? That is what you call burnishing. The reason for this is a lot of cleaning or rubbing of this miniature abrasively. This doesn’t occur on freshly painted miniatures however, it occurs over time particularly on areas with higher traffic. You’ll see that if a fixture or some other gear is rubbed from a painted miniature, then there’ll be glossy places. The culprit for this is that the use of horizontal paint without cleans resistance. So for stains that need regular cleaning, the ideal method is to utilize a miniature painting service. Cleaning miniature painted with gloss paints can readily be achieved using soft cleaning cloth like sponge. Additionally after cleaning, always rinse the region with fresh water.